How To Prepare For Successful Carpet Steam Cleaning
Cleaning carpets is so important to keep homes clean and healthy. Carpet Steam Cleaning is one of the effective methods of professional cleaning that you can adopt. It would certainly need a pro for this job. The water is turned to steam at about 100oC for actual cleaning of the carpets. Further, carpet cleaning companies use dry chemicals in the cleaning process. So, the same process is referred to as the hot water extraction method.
How to steam clean the carpets?
Steam cleaning is the perfect way to go ahead with deep cleaning of carpets. But it does require preparation. You should keep aside at least one hour for each room.
Cleaning the floor
If there is anything on the floor, pick everything up. Move everything small to other rooms until the cleaning is not completed. For protecting the sofa legs, put aluminum foil beneath them.
Removing all the dust from the rooms
The more dust there is in the room, the harder it is to clean. After Carpet Cleaning Brisbane, remove all dust from furniture. You should remove it from the nooks and corners as well.
Vacuuming
The carpet steamers can get easily clogged with too much debris present. It is important to vacuum the floors first. Remove all the furniture that you can from the rooms. Vacuum slowly from one direction at a 90o angle. Twist all the carpet fabrics well, so it's best to clean from different directions.
Treatment of all stains
Steam cleaning does make it hard to remove all the stains. So, before Carpet Steam Cleaning it's best to remove the stains. Further, shampooing is a good way for removing stains. Steam cleaners force the dust inside the deeper grains of the carpets. If you don't remove the stains, after drying, the stains appear once again.
Removing of spots
After preparing the carpets, it's time to do a spot test. Start from a spot test near the closet or any such location. Take a cleaning product and apply it to the surface of the carpets. Wait for about 5 minutes and then use an undyed rag. Using a fresh cloth, dry the area properly.
If you see any fading, then don’t use the cleaning solution again.
Filling of tank
Add hot boiling water into the cleaning tank. Add castile soap to the boiling water. You can use 1/4th for every gallon of water used. Read the manufacturer's instructions while using the solution. You should wait for about 8 to 12 hours for the carpets to dry after Carpet Cleaning.
Allow the steam cleaners to move slowly to help in spreading the cleaning solution everywhere. Don't allow too much water to come out from the machines. If there is moisture, it will lead to the growth of mold and mildew.
Conclusion
Clean carpets every once a year and best to clean during summers. The drying time is faster and the lifespan of the carpets is increased. Call for professionals to do the job excellently.
No comments